Procedure For Electrofusion Tapping Tee

1.  Scrape the necessary pipe surface as per above Mechanical Scraping procedure for saddle type fittings.
2.  Remove the fitting from its packaging and check the matt of the fitting is clean. Do not touch the fusion zone of the fitting or allow it to be contaminated.
3.  For fusing tapping tees correctly, sufficient amount of top load should be given properly on fitting. 
4. Top loading clamp suitable for different diameter range can be used. This clamp can load saddle on to pipe for required load. 
5. Top loading saddle clamp are light weight for easy transportation on site & are suitable for pipe dia. Up to 500mm. 
6. Degrease the heating mat with cleaning fluid IPA and white tissue paper. Now fit the tapping tee on pipe with its top attached to the spring of top loading clamp. Tighten the Knob (hand wheel) of clamp until the adjusting spindle (indicator rod) is flush with the top surface